Mask is a Coal tar based liquid for use in foot baths, on ground floors / soil floors, drains, etc. Mask has a dual purpose : It reduces microbes and is an excellent masking agent. Mask is widely used to remove stubborn germs from sinks, waste bins, and drains. Mask will stain surfaces when used at a high concentration. Product pH at a 1 % dilution is between 2.00 - 3.00.

TBC is an inhibited, liquid, heavy duty toilet bowl cleaning agent to remove stains. TBC works fast and effectively, removing stubborn stains that discolour toilet bowls. Product pH at a 1 % dilution is between 1.00 - 2.00.

Super Vuma New is a heavy duty, high alkaline, Caustic & Cresol blend. Super Vuma New is a low foaming, cleaning / degreasing liquid, for heavily soiled areas and hard surfaces in general. Product pH at use concentration of 1% is between 12.00 - 14.00. Not suitable for food contact surfaces.

Remove Super is a 40 % hydrochloric acid based, cement cleaner. Product pH is between 1.0 - 2.00.

Drain-L is a sulphuric acid based, inhibited, liquid, heavy duty, drain cleaner to remove obstructions e.g. hair, paper, napkins in toilets and drains.

Active S is a Sulphuric acid based, inhibited, liquid, heavy duty, acidic rust and scale remover. May be used as a drain cleaner to remove obstructions e.g. hair, paper, napkins in toilets and drains.

A phosphoric based, acidic compound for the removal of rust, scale and light oils, providing a light phosphate coating prior to painting.

Active MP is a phosphoric, hydrofluoric acid blend containing wetting agents and surfactants. Active MP is designed for the removal of rust, scale and light oils, providing a light phosphate coating prior to painting. Product pH at a 1 % dilution is between 1.00 - 2.00.

Active H is a hydrochloric acid based, inhibited, liquid, heavy duty, acidic rust and scale remover. Hydrochloric acid is also used in the production of batteries, photoflash bulbs and firework etc.

Active 2 is an acidic, medium duty, non foaming liquid descaling agent that removes oxides, light rust, heat and mineral scale from most surfaces. Product is used in automatic and CIP systems. Product pH at a 1 % dilution is between 1.00 - 2.00.